12/2021 Rev. 1.0
6
OVERALL DESCRIPTION
TRACTOR
Parts of the tractor are listed below
(refer to Figure1):
a.
Wire reel bearing
b.
Control Board
c.
Dust Box
d.
Dust Bag
e.
Axis adjustment lever
f.
Air inlet for dust extraction
g.
Dust suction hose
h.
Wire feeder unit
i.
Axis adjustment lever
j.
Laser
k.
Gear
l.
Nozzle
m.
Axis adjustment lever
n.
Car
CONNECTION GUIDE
WARNING:
The installation and first operation of the machine should be done by
authorized technical personnel.
SAW WELDING POWER SUPPLY CONNECTION
Connect the communication cable between the SAW welding power
supply and the tractor. The part to be connected to the tractor is shown
in the figure (Figure 2 -a).
Connect the welding negative (-) cable between the workpiece and the
device.
Connect the welding positive (+) cable between the wire feeder and the
device.
Make sure the ground wire is connected.
Figure 2, SAW Welding Power
Supply Connection
Figure 1, Tractor
