DSP
LASER
DSPLSR01EN
35
12.2. Identification plates
The following data are reported on the rear identification plate of TX:
•
Name, address and contact references of the Manufacturer of the device
•
Number of the Patent which protects the device: 0001342651
•
Safety category in compliance with the standard EN 61496-1:2014:TYPE 4
•
Logotyp
e “Costruito in Italia”
•
CE marking
•
Logotype of the Notified Body which has executed the certification
•
Indication of the presence of the laser beam
•
Class of the laser equipment according to EN 60825: class 1M
•
Warning not to directly observe the laser beam with optical instruments
Fig. 12.3 Rear identification plate of TX
The following data are reported on the side plate of TX:
•
Part of the device: DSP LASER-TX
•
Serial number and manufacturing date
•
Indication of the type of TX, that is its configuration
Fig. 12.4 Side identification plate of TX
The following data are reported on the identification plate of RX:
•
Name, address and contact references of the Manufacturer of the device
•
Patent number: 0001342651
•
Safety category in compliance with the standard EN 61496-1:2014 : TYPE 4
•
Logotype “Costruito in Italia”
•
CE marking
•
Logotype of the Notified Body which has executed the certification
•
Detection capacity
: ≥ 14mm
•
Lead time: 5ms
•
TX-RX protection level: IP65
•
OSSD solid state
– I max: 100mA
•
Operating temperature: 0-50°C
Summary of Contents for DSP LASER
