NUOVA ELETTRONICA DSP LASER, Instruction Manual

Page: 5 / 66

DSP LASER
DSPLSR01EN 1
1. Foreword
Purpose of this manual is to inform both the technical personnel responsible of the
installation (manufacturer or who overhauls the press brakes, from now on pointed out for
easiness in writing only with the term of manufacturer) and the user of the machine, where
the device will be installed, about the operations of assembly, installation, use and
maintenance of the equipment. The information relevant to the use of the machine must be
integrated with the information contained in this document. The instructions are addressed
to the manufacturer’s personnel charged to integrate the equipment into the press and to
the us
er’s personnel of the press who executes the normal working operations, once the
device is installed (use, adjustment, maintenance, etc.). The installation of the device
presupposes a minimum technical knowledge and even the compliance with the current
laws relevant to the safety in the working places and to the fire prevention.
The manual must be kept, both by the manufacturer and by the user of the machine, with
care and in a place such to be immediately available each time it is necessary.
Contact Nuova Elettronica for clarifications, explanations or to ask for possible additional
copies or updates of the manual itself.
Nuova Elettronica reserves the right to execute changes to the production and to the
manual without the obligation to update the production and the previous manuals.
1.1. General Information
This manual has been issued by the manufacturer of the equipment and constitutes an
integral part of the equipment itself.
It defines the purpose which the equipment has been manufactured for and all the
information in order to ensure a correct and safe utilization.
Nuova Elettronica, in pursuing a policy of constant development and update of the product
and combining the evolution of the “state-of-the-art” of the laser safety devices for the press
brakes, can make changes without any notice.
Nuova Elettronica declines any responsibility for changes made to the device by the user.