
Setting Up the NDX800 Controller the DJ|iO with Traktor LE
This guide will walks through setting up one or two Numark NDX800 Controllers and a DJ|iO USB
audio interface with Traktor LE.
Contents
Install the Latest Software and DJ|iO Drivers ......................................................................... 1
NDX800 and DJ|iO Hardware Setup ...................................................................................... 2
Traktor LE Setup Wizard......................................................................................................... 2
Traktor LE Audio Setup........................................................................................................... 4
Traktor LE Controller Manager Setup..................................................................................... 5
Install the Latest Software and DJ|iO Drivers
Note:
The NDX800 Controller is a class-compliant USB MIDI device. No extra drivers are
needed for your Mac or PC to recognize it.
1. Before you begin, make sure you have the latest available DJ|iO drivers for your system
installed on your computer. Visit
2. Next, make sure you have the latest version of Traktor LE installed.
If you do not have Traktor LE installed, download it here:
You’ll need the authorization code supplied with your product to register the software.
Launch Traktor LE, then go to
Help > Launch Service Center
. Select the
Updates
tab and
make sure you download any
Traktor
updates you see.
1