20
G
B
4.7 Material damage
Caution!
To prevent material damage, follow the
instructions below.
• Place the appliance only on a level, dry and
non-slip surface so that the appliance can
neither fall over or slip off.
• Do not place the appliance on a hot cooker
hotplate.
• Do not expose the appliance to direct
sunlight, as UV rays and overheating may
make the plastic brittle.
• Always hold the appliance by the sides (see
Fig.
). If you hold it by the ring insert, the
appliance might tip over or fall down.
5. Unpacking and setting up
1. Take the individual parts out of the
packaging.
2. Check that the individual parts are complete
(see “1.3 Scope of supply“ on page 17) and
undamaged.
3. Clean the appliance thoroughly before using
it for the first time (see “7. Cleaning“ on
page 22).
on a firm, level, non-slip, heat-
resistant surface so that it cannot tip over.
Caution!
Do not operate the appliance without
ring insert
and bottles or jars
might explode if you place bottles or jars directly
on glass dish
.
in base
(see Fig.
Ensure that ring insert
is positioned
correctly.
6. Turn dial
to the far left.
7. Connect the mains plug to a suitable mains
socket (see “3. Technical data“ on page 17).
The appliance is now operational.
6. Operating the appliance
6.1 Displays
The operating state in question is displayed by two-colour LED
:
Plastic and glass bottles
Food jars
Time taken to heat
2 min. - 23 min.
5 min. - 20 min.
Press the dial
Once
Twice
Colour of LED
Blue
Orange
