30
4. Starting the device
Note:
Always connect the cables before
inserting the mains adapter into the socket.
4.1 Connecting the parent
unit
The parent unit is powered by the supplied
rechargeable LiPo battery. This can be
charged using the supplied mains adapter.
Caution!
To prevent malfunctions, first
insert the battery into the parent unit and
then connect the mains adapter to the
parent unit.
1. Remove the battery cover
on the back
of the parent unit
, by sliding it
downwards.
2. Put the battery in its compartment as
indicated on the unit. Make sure you
insert it with the correct polarity (+ and -).
3. Slide the battery cover
back onto the
parent unit
4. Insert the small plug of the mains adapter
of the
parent unit.
5. Insert the plug into a power socket that
matches the rating given in the technical
Display
flashes rapidly
Lullabies on/off
button
was held
down. The next song is played.
flashes slowly
Eco-Mode has been activated. Your
baby is very probably asleep. That is
why the lullaby function has been
deactivated.
Shows the battery’s charge state. The
more bars you can see the higher the
charge in the battery.
flashes
Battery power is extremely low. The
device will shortly switch itself off.
flashes and bars run
across the display
The parent unit is connected to mains
power and the battery is being
recharged.
lights up
Nightlight has been activated
flashes
Eco-Mode has been activated. Your
baby is very probably asleep. That is
why the nightlight function has been
deactivated.
Shows the selected volume level. The
more bars you can see the higher the
selected volume
Loudspeaker symbol with no bars: The
device is muted.
Parent unit
Light
Display
Meaning
