31
5. TECHNICAL DATA
Power supply:
Operating humidity:
Protection class:
Degree of protection:
Power rating:
Heat output:
220 V - 240 V ~ / 50Hz
20% - 95% relative humidity
I
IPX0
200 W (motor)
500 W
Steaming or blending
does not work
Bowl is not correctly
positioned.
Ensure that the lid is correctly fitted to the
bowl and the latter correctly fitted to the
base unit.
Bowl lid not correctly
positioned.
Device not connected to the
power supply.
Connect the plug to the wall socket.
Bowl leaking
No blade fitted.
Install a blade as described in section
2.2.1.
Seal incorrectly applied.
Apply the seal to the blade with the sealing
lip at the bottom (section 2.2.1).
Seal is porous or damaged.
Use the spare seal.
Bowl damaged.
You require a new bowl. Contact your
relevant dealer (section 3.3).
Steam escaping from the
edge of the bowl lid
(steam inlet) during steam
cooking
Bowl lid not correctly applied. Apply the lid to the bowl so that the latter
is fully sealed.
Hot steam duct blocked.
Clean the hot steam duct (section 3.1).
Lid deformed.
You require a new lid. Contact your
relevant dealer (section 3.3).
Steam outlet on base unit is
deformed.
Contact your relevant dealer (section 3.3).
The cover for the hot steam
duct is not fitted.
Fit the cover to the underside of the lid.
Jerky or noisy operation
Blade is not correctly fitted.
Install the blade as described in section
2.2.1.
The steam cooking
indicator extinguishes
after activation
Bowl is not correctly seated.
Check that the bowl and lid are correctly
fitted and locked in place.
No water was filled into the
water tank.
Allow the device to cool and add the
required level of water.
Ingredients are not mixed
correctly.
Blade is blunt.
You require a new blade. Contact your
relevant dealer (section 3.3).
Blade is not correctly fitted.
Install the blade as described in section
2.2.1.
Problem
Possible cause
Solution