background image

WARNING: Electrical Device

In order to ensure proper operation and prevent shock 
or fire, all products must be installed correctly. Read all 
warnings and follow all installation instructions.

Ground-fault equipment protection must be used to 
minimize the danger of fire from sustained electrical 
arcing if the heating cable is damaged or improperly 
installed and to comply with Nuheat requirements, 
agency certifications and national electrical codes. 
Conventional circuit breakers may not stop arcing.

Do not substitute parts or use electrical tape. 
Component approvals and performance characteristics 
are based on Nuheat specific parts only. Substitution 
will void approvals, warranties and performance claims.

The heating cable core is conductive and can short if 
not properly insulated and kept dry.

Heating cable core bus wires can overheat and short 
when damaged. When cutting the cable jacket or core, 
do not break bus wire strands.

Component and heating cable ends must be kept dry 
before and during installation.

Fire-resistant thermal insulation materials should be used.

For use with Nuheat R8P5, R13P8 and 13FP cables.

Rated: 277 V; Max: 50A

Maximum continuous exposure temperature: 65˚C (149˚F)

www

.nuhea

t.com

Assembled in Canada

1.800.778.W

ARM
 (9276)

Nuheat Freeze 

Protection Products

BEFORE YOU START:

•  Read through entire installation instructions prior to 

beginning installation.

•  All instructions available at www.nuheat.com
• 

DO NOT

 install Nuheat Freeze Protection products in 

direct contact with combustible surfaces or materials. 

• 

DO NOT

 rest a hot heat gun on any Nuheat Freeze 

Protection Products. 

• 

DO NOT

 make any modifications to Nuheat Freeze 

Protection Products while connected to power.

•  THIS HEATING PRODUCT SHOULD ONLY BE 

INSTALLED BY QUALIFIED PERSONNEL WHO ARE 
FAMILIAR WITH THE CONSTRUCTION AND OPERATION 
OF THE APPARATUS AND RISKS INVOLVED.

•  THE INSTALLATION OF THIS HEATING PRODUCT 

SHALL BE IN ACCORDANCE WITH THE 
MANUFACTURER’S INSTRUCTIONS AND REGULATIONS 
OF THE AUTHORITY HAVING JURISDICTION.

N

uhe

at

 W
eathe
r-Re
ad

y H

eat

 T

ra

ce

 

SP

LIC

E/

TE

E K

IT

 

M

OD

EL 

#: 

RP

ST

 

PA

RT 

#: 

OC

00

62

DE-ICING 

AND SNOW MEL

TING EQUIPMENT 3YH6

  

PIPE HEA

TING CABLE 4YM1

 

DA

TE OF MANUF

ACTURE

Reviews: