NUGENI VAP010, User Manual

Page: 10 / 56

10
mynugeni.com
3
+
1
2
Emptying Dust Bin
1. Pull up on dust bin release lever.
2. Open dust bin lid, and tilt unit to empty.
3. Inspect mesh pre-filter and air filter for excessive dust or hair
build-up. Remove, clean, and replace as needed. (see next
section for details)
4. Close dust bin lid securely after emptying, ensuring lid fully
“snaps” closed.
1. Install vacuum tool adapter: align adapter base with intake port
and push firmly to “click” secure.
2. Install accessory tools as needed: fit accessory end into adapter
opening and push firmly to secure. (align marks on tool and
adapter for proper orientation)
Attach Accessories
Note: All tools can be
used with or without
extension wand.
3. Press and hold adapter release button.
4. Pull tool adapter to remove from
vacuum unit.
To Remove Tool Adapter:
Attach long reach extension
wand to tool adapter, then
connect accessory to
end of wand.
For Added Reach:
Turn power off. Do not open dust bin while vacuum is running.
Remove handheld unit from mopstick before emptying dust bin.
1
2
4
1. Unlock mesh pre-filter: twist counter-clockwise to
“click” open.
2. Remove mesh pre-filter.
3. Remove air filter by pulling firmly.
Removing Filter Parts
1
2
3
Make sure dust bin is empty before accessing filter.
For optimal performance, empty dust bin after each use.