background image

7

its highest certified power level in all tested

frequency bands, and placed in positions that

simulate RF exposure in usage against the head with

no separation, and near the body with the separation

of 10 mm. Although the SAR is determined at the

highest certified power level, the actual SAR level of

the device while operating can be well below the

maximum value.

This is because the phone is

designed to operate at multiple power levels so as to

use only the power required to reach the

network. In general, the closer you are to a wireless

base station antenna, the lower the power output.

The exposure standard for wireless devices

employing a unit of measurement is known as the

Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W/kg.

This device is complied with SAR for general

population

/uncontrolled

exposure

limits

in

ANSI/IEEE C95.1-1992 and had been tested in

accordance with the measurement methods and

procedures specified in IEEE1528. This device has

been tested and meets the FCC RF exposure

guidelines when tested with the device directly

contacted to the body.

The FCC has granted an Equipment Authorization for

this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF exposure

guidelines. SAR information on this model phone is

on file with the FCC and can be found under the

Display Grant section of

www.fcc.gov/oet/ea/fccid

after searching on FCC ID: 2AHJO-NX531J.

For this device, the highest reported SAR value for

usage against the head is 0.499W/kg, for usage near

the body is 0.652W/kg.

While there may be differences between the SAR

levels of various phones and at various positions,

they all meet the government requirements.

SAR compliance for body-worn operation is based on

a separation distance of 10 mm between the unit and

the human body. Carry this device at least 10 mm

away from your body to ensure RF exposure level

compliant or lower to the reported level. To support

body-worn operation, choose the belt clips or

holsters, which do not contain metallic components,

to maintain a separation of 10 mm between this

device and your body.

Summary of Contents for NX531J











Reviews: