nuConnect ampX · Quick Start Guide · 12/2019
1
nuConnect ampX
Integrated Amplifier and Wireless Connector
QUICK START
GUIDE
®
!
1
Mounting the antennas
Place the nuConnect ampX on a flat, stable surface. Make sure
that there is some free space around the amplifier to ensure proper
cooling.
To mount the antennas, Place the antennas over the antenna termi-
nals on the rear panel and turn the antennas clockwise until they are
firmly attached. Point the antennas upwards.
2
Kabelverbindungen
2
Cable connections
Make sure all cable connections between amplifier, sources, loudspeakers and (optional) subwoofer are made
before switching the amplifier on!
Sources, subwoofer
Passive
loudspeakers
At the digital Port input,
you can plug in the
supplied HDMI/ARC
adapter, enabling
the direct connection
of a TV.
Be sure to enable the
CEC and ARC functions
on the TV and set
the audio output format
to PCM.
The nuConnect ampX is
connected to the power grid using
the supplied power-cable.
Move the power switch on the back
to the ON position to switch on the
amplifier! If necessary, press the
power-button on the remote control
to “wake up” the amplifier.
You can find the most recent version of the
operating manual here: www.nubert.de/downloads/61/