Chapter 4: Additional Local Configuration
46
TouchPoint Console Installation and Setup Guide
Outbound V.34 settings
Each fax line on fax-enabled versions of TPC must be configured for Outbound calling V.34 settings. Depending upon
the version of Equitrac Professional installation, the terminal firmware, and the fax board installed, one of three
installation scenarios must be followed:
1
TPCs with newer model fax boards, and newer TPC application and firmware.
2
TPCs with older model fax boards and older or newer TPC application and firmware.
3
TPCs with newer model fax boards that use older TPC application and firmware and are being used on older
installations of Equitrac Professional.
Newer model fax boards, new TPC firmware
To configure outbound calling on TPCs with newer fax board(s), a selection of buttons indicating available outbound
calling options are displayed, as well as fields to indicate which country the Fax boards will be used. Pressing the
Country fields displays a pick list where you can select the appropriate country for your deployment:
The Fax Devices screen also provides access to the Fax Monitor tool used for field diagnostics and fax conversation
capture. This tool is described on page 49.
