NTT docomo MONO MO-01K, Instruction Manual

Page: 60 / 162

Calling
58
〈 Example 〉 When a call is received in sleep mode
1
A call is received
The incoming call screen (full-screen) appears.
･
Press
O
/volume key to stop ringtone or vibration.
2
→ [ACCEPT]
Declining a call : → [REJECT]
Rejecting a call and sending SMS : → [Response options]
→ [Reject call with SMS] → Select a message
Recording messages : → [Response options] →
[Answering Machine]
3
When a call is ended, [END CALL]
◆
Information
･
When receiving a call while the Home screen is displayed or
application is activated, the notification screen is displayed at the
top of the screen. After you accept and end call, the previous
screen is displayed. Tap a caller's name or phone number on the
incoming call screen, the incoming call screen (full-screen).
･
When you could not answer a call, notification icon (
→
P.42)
appears on the status bar. Open the Notification panel (
→
P.43) to
check missed calls, dial or send SMS.
･
With "Suguden setting" (
→
P.61) ON, you can answer incoming
calls simply by holding the terminal up to the ear.
The following operations are possible in the screen during a
call.
･
You can adjust call volume with the volume key while dialing/during
a call.
a
Name or phone number
b
End call
c
Show the dialpad
Send touch-tone signals.
･
To hide the dialpad, tap [BACK].
d
Mute ON/OFF
e
Menu during a call
･
Tap [Hold]/[Cancel hold] to put a call on hold/cancel hold.
･
When you subscribe to the Call waiting service, tap [Add call] to
make a call to another person.
f
Call duration time
Receiving a call Operation during a call
a
b
c
d
f
e
g