P3250-1M
Multimeter digital “BT”, True RMS
20
5.
To Connect with Mobile Device
This multimeter supports communication with Android or iOS based smart devices
through Bluetooth. You can use the free application software on the smart devices to
monitor the measurements, perform remote control, view trending graphs, etc. The
recorded data can be saved as CSV file. The maximum number of record that can be
stored depends on the free storage space in your smart device. Two meters can be
connected simultaneously.
Note
: Bluetooth connectivity works over a range of about 7 to 8 meters. The work range
is much longer in open-sided and non-occluded wide range environment, even up to 20
meters. When the Bluetooth function is idle for 10 minutes, the Bluetooth will be turned
off automatically. Before turning off, the buzzer will beep twice.
Install the free application software
System Requirements of Mobile Devices
Bluetooth 4.0 Android APP
Android devices with BLE 4.0 connectivity.
Android versions: 4.3 or above
Bluetooth 4.0 iOS APP
iPhone 6s/6s Plus, iPhone 6/6 Plus, iPhone 5c/5s, iPhone 5
(Support iPhone with BLE 4.0 connectivity, iOS7.0 or above;
iPhone 4s or the older devices are not supported.)
For Android device
If the system and Bluetooth version of your mobile device
meet the requirements, scan the QR Codes below with your
mobile device, select the Bluetooth 4.0 Android APP and
install it.
Bluetooth 4.0 Android APP
Note
:
The help content below may be not completely consistent with the application software,
only for reference. Visit
www.ntl.at
to get the latest version of this user manual.
