NTI E-AVDS-4G1, Installation And Operation Manual

Page: 2 / 11

2
Materials included with this kit:

E-AVDS-4Gx Voice dialer

4G Antenna

URL slip with path to this manual
Included with E-AVDS-4Gx-P Only:

100-240VAC @ 50\60Hz; 12VDC 1A AC Adapter ("-P" model only)

Country-specific Line Cord

2 ea. WC-UR2 (CN1469) butt splice connectors
OPEN THE E-AVDS-4Gx
To configure the E-AVDS-4Gx(-P) for operation and to access the mounting holes, you must first open the case of the
dialer.
There are four tabs that hold the case together. Two on the top side, and two on the bottom side. To open the case for
jumper placement, press down firmly on the seam of the case near the tabs on one side of the case and snap the case
halves apart.
Tabs
With the rear of the case removed, two counter-
sunk mounting holes are provided on the rear
cover. Use these to secure the E-AVDS-4Gx to
your desired mounting location.
Mounting Holes
Rear Cover