MiCard Installation Guide_english_V2.doc
© NT-ware
8
In the following please find an explanation of the terms used and the possible
settings on the configuration site:
Connected ID Module
shows the ID Module connected, e.g. MiCard / miniMIND
Last Read ID
shows the last ID read by a card swipe
Conversion Result
shows the result of the last read ID when the configured code
conversions are applied. This is the ID sent to the server for authentication.
Code Remove First
specifies the number of characters to be removed from the ID read before the code
conversion takes place. For instance a value of 3 applied to A881C045 will result in
1C045.
Code Remove Last
specifies the number of characters to be removed at the end of the ID read before
the code conversion takes place. For instance a value of 3 applied to A881C045 will
result in A881C.
Code Length
specifies the code length applied after the code conversion. For instance a value of 6
applied to A881C045 will result in A881C0, whereas a value of 10 applied to
A881C045 will result in 00A881C045.
