NSR Marine NVR-3000 Operation And Installation Manual Download

Page: 28 / 105

NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL

NVR-3000 OM.E 20210412-02

3. VOICE OPERATION

You can make a voice call at Main screen or from

[MAIN MENU]

[USER]

[PRIVATE CHANNEL]

[CALL]

3.1 Channel Region Selection

The channel region can be selected by clicking

[REGION]

on the main menu.

[INTL]

: International Channel

[USA]

: USA Channel

[CAN]

: CANADA Channel

[IWW]

: Inland Waterway Channel

[PRIV]

: Private Channel

Note:

Up to 200

Private channels are available only for fishing or specially assigned channels.

3.2 Channel Setting

There are three ways to

set the channel. See below for details:

Note: To set the radiotelephone to CH16, click [CH16].

①

Click

[CH]

, the

mark appears:

Click

[CH]

again, the following screen appears:

Summary of Contents for NVR-3000










































































































Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands

NSR Marine NVR-3000, Operation And Installation Manual

Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands