NSK Ti-Max X450, Operation Manual, Page: 12 / 43

PANA SPRAY Plus
Handpiece
Cotton Swab
Handpiece
11
FR
EN
Fig. 10
Spray Nozzle
7-5 Cleaning (Rear of the handpiece) (X450STL)
Wipe all internal surfaces at rear of the handpiece with an alcohol-saturated cotton swab.
7-6 Lubrication
NSK PANA SPRAY Plus
X450L / X450 / X450KL / X450WLED / X450WHL / X450MWL / X450STL
Apply NSK PANA SPRAY Plus every time after each use and / or before autoclaving.
1) Remove the bur from the handpiece.
2) Insert the Spray Nozzle onto the Pana Spray can.
3) Insert the Spray Nozzle in the rear of the handpiece. Hold the handpiece and spray for approximately
2-3 seconds. Continue until it runs clear from the handpiece head for at least 2 seconds. (Fig. 10)
Fig. 9