Operation Procedure
24
9
The motor operation will be controlled by the foot pedal of the dental unit (also called Rheostat). Pressing the
pedal all the way down will run the motor up to the Max speed set at step 4
10
Memory setting
Press and hold the Memory Key for more than 2 seconds. After 2 short beeps the memory sign will stop blinking
and gear ratio and speed will be memorized in the selected program number (M1 through M6 is shown, so that
up to 6 programs can be stored in memory).
NOTICE
A blinking
indicates that the program is not stored in the memory yet.
4-2
Rotary Endo Mode (NLX E only)
1
2
7
4
Select the proper speed recommended by
file manufacturers
3
8
Set the light intensity
Gear Ratio
Rotation Speed (min
-1
)
Setting range (min
-1
)
1:1
100 – 6,000
20 – 500:10 Increment
4:1
30 – 1,500
500 – 1,000:50 Increment
1,000 – 6,000:100 Increment
6:1
20 – 1,000
5
Select the proper torque recommended
by file manufacturers
Gear Ratio Torque Setting Range (N
･
cm)
Setting range (N
･
cm)
1:1
0.3 – 3.0
0.1 Increment
4:1
0.8 – 6.0
0.4 Increment
1.0 – 1.2:0.2 Increment
1.2 – 6.0:0.6 Increment
6:1
1.0 – 6.0
Select the gear ratio
according to the handpiece
1:1, 4:1, 6:1
Select the program # - 6
programs can be selected
Select the Rotary Endo
Mode
6
Select the Auto-Reverse
Mode: AUTO STOP /
AUTO REVERSE STOP /
AUTO REVERSE
FORWARD
Select the rotation
direction, FWD / REV
Set the light intensity
OFF
Strong Moderate Weak