English
Components
11
No.
Key
Name
Display
Function
7
Volume Key
E
Set the volume of the notifying sound generated when
reaching a set torque limit value or when errors occur
(High·Low·OFF)
By each time pressing this key you can change the
volume from OFF -> volume 1 -> volume 2 and then
back to OFF again
CAUTION
When the volume is set to OFF, there will be no alarm
sound. Care should be taken when using the system with
the volume set to OFF.
8
Gear Key
F
By each time pressing this key you can switch the gear
ratio
from 1:5 -> 1:1 -> 4:1 -> 6:1 -> and then back to 1:5
again – in General Application Mode
from 1:1 -> 4:1 -> 6:1 -> and then back to 1:1 again –
in Rotary Endo Mode
9
Auto Rev. Key
(NLZ E)
*Rotary Endo
Mode Only
H
By each time pressing this key you can switch the mode
between AUTO STOP -> AUTO REVERSE STOP -> AUTO
REVERSE FORWARD and then back to AUTO STOP again
AUTO STOP
AUTO REVERSE
STOP
AUTO REVERSE
FORWARD
10
Mode Key
(NLZ E)
Setting Mode
Key
(NLZ)
I
Toggles between 3 application modes as below
General
Application Mode:
Rotary Endo
Mode:
Reciprocating Endo Mode:
No display
-
Change the setting as described in “3-8 Changing the
settings for various functions”
11
Rev. Key
-
The rotation direction can be changed by this key. The
LED lights up during reverse rotation.