NSK ENDO-MATE DT2, Operation Manual, Page: 13 / 267

12
4
Preparation for Use
CAUTION
●
To prevent cross contamination between patients, use a disposable barrier sleeve and barrier film
that meet local regulations�
4 – 1 Connecting AC adaptor
Insert the jack of the AC adaptor into the AC power cord connector socket with the mark of the jack
cast down�
4 – 2 Charge (If the battery is used)
This product uses AC adaptor to charge the battery�
Before starting use, check the charge status of the battery� The battery status can be checked on the
charge indicator�
1
Firmly insert the AC adaptor into a power
supply�
2
The AC IN lamp lights in green�
3
The CHARGE lamp illuminates and charging
starts (battery voltage is measured and
charging starts only when necessary)� The
charge indicator on the LCD display shows
animation while charging�
* There is no need to turn on the power�
4
When the CHARGE lamp turns off, charging
has been completed�