NSK EDD Megatorque Motor, User Manual, Page: 60 / 398

2. Specifications
— 2-38 —
2.11. CN3: Resolver Cable Connector
Caution : Connect the Cable Set provided with the Driver Unit. Do not cut or
hookup to other cable because the Cable Set is uniquely made for the
position sensor.
Table 2-26: Connector list
Driver Unit connector Japan Aviation Electronics Industry, Ltd. DF02R014NA6 or equivalent
Mating connector type Japan Aviation Electronics Industry, Ltd. DF02P014F22A1*or equivalent
Mating connector hood Japan Aviation Electronics Industry, Ltd. DF02D014C21*or equivalent
* Provided with the Cable Set.
2.11.1. CN3 Pin-Out
Fig 2-43: Pin-out
1
INC-A 8
ABS-
COM
2
INC-B 9
INC-
COM
3
INC-C 10
–
4
– 11
–
5
ABS-A 12
–
6
ABS-B 13
–
7
ABS-C 14
FG
2.11.2. CN3 Signal List
Table 2-27: Signal list
Pin Signal name Function
1 INC-A Incremental resolve signal øA
2 INC-B Incremental resolver signal øB
3 INC-C Incremental resolver signal øC
5 ABS-A Absolute resolver signal øA+
6 ABS-B Absolute resolver signal øB+
7 ABS-C Absolute resolver signal øC+
8 ABC-COMMON Absolute resolver common
9 INC-COMMON Incremental resolver common
14 FG Frame ground
Danger : Never connect pins not listed above.
Danger : Check orientation of the connector when inserting it. Tighten the screws
to secure the connector so that it does not disconnect because of shock
or pulling.
Danger : Do not connect or disconnect the cable when the power of the Driver Unit
is on.
！
！
！
！