© Brüel & Kjær Vibro
● C107759.002 / V03
Page 19 of 22
Technical alterations reserved!
Brüel & Kjær Vibro
│
Instruction VCM-3 On-Site Commissioning
VCM-3 Homepage Commissioning
Procedure
EN
UNRESTRICTED DOCUMENT
4.8
Completing on-site commissioning
– visible check
IMPORTANT NOTE!
This visible check assumes that the VCM-3 is running the factory monitoring
template.
When commissioning has completed the VCM-3 front panel shall look like the picture below.
LED color
Explanation
Network
Flashing
On
– flashing green. The LED on the connector where a LAN cable is connected flashes
green. The VCM-3 is connected to the network.
Status
– System
On
– Blue, indicates that the VCM-3 is
not
connected to a server in the condition
monitoring centre.
On- Green, indicates that the VCM-3 is connected to a server in the condition monitoring
centre.
Both states are valid depending upon the actual network state.
Status - System
Status - Template
The factory template is loaded and running.
Status - Online
A green color shows that the VCM-3 can ping the specified gateway. This tells that the
VCM-3 is integrated into the network setup.
Boot Status
On-Green. This indicates the the VCM-
3 has completed it’s boot procedure
DI/O
On
– Green, as Modbus is enabled in the factory template.
DO
Off
– as the digital output is not in use.
DI
Off
– as the digital input is not in use.
AC/DC
On
– Green, input channels which are wired to an accelerometer. In this example
channel 1-9.
AC/DC
On
– Blue, input channels which are configured as constant current source (CCS)
accelerometers, but not wired to an accelerometer.
AC/DC
On
– Blue, input channels which are configured for an AS247 MEMS sensor with 24V
supply, but not wired to a sensor.
Speed/DC
On
– Green, as all Speed/DC sensor inputs are enabled in the factory template
If the machine is rotating slowly or you put a piece of metal in front of the mounted speed
sensor, the corresponding LED will flash between light green and dark green.
Speed/DC
4-20mA
On
– Green, as all 4-20mA sensor inputs are enabled in the factory template.