English
Rev C
3” Rapid Z™-CUT (No Bearing)
INSTRUCTION MANUAL
Z-CUT
INTRODUCION
Thank you for purchasing the NSI Solutions Rapid Z™-CUT. The Rapid Z™-CUT is a 3”, stacked blade type,
grinding wheel designed to quickly grind stone and quartz. This version, without a top bearing, is
designed to be used for free hand shaping or anywhere a template bearing is not required. Please read
these instructions thoroughly before using this tool. Keep these instructions in a place where operators
can access it easily.
Read and Understand All Instructions
Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal
injury. Additionally, observe all safety instructions provided with the electric and air tools.
Use Proper Safety Gear
To prevent damage to eyes from flying debris, wear protective glasses or face shield. Be sure to wear
waterproof safety boots, appropriate hearing protection and dust protection as required.
Inspect before Use
Before each use, inspect the Rapid Z™-CUT for bent, cracked or otherwise damaged blades. Replace
damaged blades before use. Never use a Rapid Z™-CUT with damaged blades or other components.
Wet Use Only
The Rapid Z™-CUT is designed for wet use only
Observe maximum RPM
Maximum RPM 12,000
Caution
Always be sure that the grinder is switched off and unplugged from power (either electric or air)
before installing/removing the Rapid Z™-CUT or attempting to perform any inspection or
maintenance.
!
!
!
!
!
Scan QR Code to see resources and videos regarding the
Rapid Z™ items or visit us at
YouTube channel
NSITools
.
!
