NSFOCUS ADS NX3 10000 Series, Installation Manual

Page: 18 / 46

NSFOCUS ADS Installation Guide
Copyright © NSFOCUS 12 V4.5R90F01SP07C236 (2019-11-19)
Figure 1-12 Rear panel of ADS NX5-10000
①
Management interface
②
USB port
③
Heat dissipation holes
④
Power switch
⑤
Power LED
⑥
Power supply
⑦
Ground connector
1.2
Power Supply
ADS devices support both AC and DC inputs. Before delivery, ADS devices are
configured with power modules. You can choose to use the AC or DC power module based on
the equipment room environment. If necessary, connect the ADS device to two independent
power supplies to implement 1+1 power redundancy. In this case, even if one of the power
modules fails, the ADS device still operates properly. The power switch and socket reside at
the rear of the chassis, as shown in
Figure 1-6 .
Specifications of the AC Power Supply
For ADS NX3-2020/2020E/2010, ADS NX5-4020/4020E, ADS NX5-6025/6025E, and ADS
NX5-8000, the AC power supply specifications are as follows:

Rated voltage range: 100–240 V AC at 50–60 Hz

Maximum output power: 450 W
For ADS NX3-HD2500 and NX5-HD4500/HD6500, the AC power supply specifications are
as follows:

Rated voltage range: 100–240 V AC at 47–63 Hz