Mowbray Lite Toilet Frame
&
Seat Range
Intended Purpose
The Mowbray Lite toilet frame and seat range is
designed to assist those who have difficulty in
lowering onto or rising from a standard toilet. The
plastic moulded seat offers support in a natural
position and the frame is height and width* adjustable.
(
*Only available with M66613 – Mowbray Lite Flat
Pack)
Unpacking
·
Remove all items from the packaging.
·
Check all component parts are present (see
contents list overleaf)
·
Check for any sign of damage.
·
If you see any damage, or suspect a fault, do not
assemble the product; contact your supplier
immediately.
General Safety Warning
Please ensure these instructions are fully read
and understood before installation/ use. Retain
these instructions in a safe place for future
reference.
M66613 - Mowbray Lite - Width Adjustable - Flat Pack
M66625 - Mowbray Lite - Fixed Width Assembled
M92740 - Mowbray Lite 510 - Fixed Width Assembled
Fitting Instructions
1 - Mowbray Lite Flat Pack only:
Assemble the
frame sides to the centre bars, slide until the
desired width is achieved, align the holes and
secure using the four E clips provided. Please
ensure the equivalent holes are used on each
side of the frame to ensure it remains square.
2 - All Models:
Remove the moulded seat from its
polythene bag and snap into place on the centre
bars of the frame.
3 - Ensure the seat is firmly in place and secure at
both back and front.
4 - Adjust to the required height by removing each
‘E’ clip in turn.
5 - Slide each leg up or down to the required
height. Align the holes in and replace
‘E’ clip.
User
Instructions
Maximum
User
Weight
Contents M66613 Flat Pack
Description
Qty.
Toilet seat
1
Frame Side LH
1
Frame Side RH
1
Frame Centre bar
2
Leg assembly
4
E-clips
8
Note: M66625 & M92740 are delivered
assembled.
Safety Precautions
Please ensure the user does not exceed the
maximum user weight 190kg (30 stones).