www.nationalrailwaysupply.com
1-800-357-3572
3
39262A
Figure 4.1
Figure 4.2
Rack Mounting
The charger can be mounted to a
standard
Electronic
Industries
Association
(EIA) 19” (483mm) rack
system using the fasteners provided by
the rack manufacturer. The horizontal
spacing of the vertical rows of holes is
specified
by
EIA-310
at
18-
5/16”
(18.312)(465.1mm). The mounting
flanges are configured for an EIA 19”
(483mm) rack for a forward mounting
arrangement (note: the width from the
outer edge fo one mounting flange to the
outer edge of the other mounting flange
is 19-
15/16”). Fasteners to match the
thread of the rack should be used in all 7
rack mounting horizontal slots on each of
the 2 mounting flanges (14 rack
mounting slots total) to maximize the
mounting integrity. The fasteners should
be torqued to 22 inch-pounds. The
dimensions and pattern of the mounting
flange rack mounting slots is shown in
figures 4.2 and 4.3
Figure 4.3
