G-18.mft with vending machine control system
S
AFETY
INSTRUCTIONS
11
National Rejectors, Inc. GmbH, Buxtehude
Protecting yourself and equipment
The coin validator may only be connected by a qualified
electrician.
Only use the coin validator according to proper use. Under no
circumstances can the manufacturer be held liable for any
damage or loss resulting from improper use of the device.
The coin validator PCB is fitted with components that could be
damaged beyond repair by electrostatic discharge. Please
observe the handling instructions for components exposed to
the risk of electrostatic discharge.
Apply the correct supply voltage to the coin validator (see
label).
Ensure the correct potential equalization in the vending
machine.
Never pull the connecting cable of the coin validator from the
additional control PCB when a voltage is applied.
De-energize the vending machine and coin validator before
you install, clean or remove the device.
Contact NRI if you want to alter the construction of the device
to a greater extent than the modifications described in these
instructions.
If the device is no longer required, please dispose of it
correctly.
We reserve the right to make technical modifications to the
device which are not covered by these instructions.
