4
National Rejectors, Inc. GmbH, Buxtehude
1
General information
Interesting facts about the coin validator system
G-13.6000
The validator G-13.6000 is a worldwide established product for the
machine industry in standardized 3 1/2" format. Due to its modular
design and the compact construction the validator is the optimum
solution for the amusement and services industry.
Due to the CMOS processor and an electronic system that is done
completely in SMD technique a greater functional variety, an
improved measuring system and a greater protection against
manipulation are possible. Apart from that the system now provides
2x12 coin channels.
Starting with number /1 (marking within the model number) the G-
13.6000 offers the possibility to choose from two configurations
(blocks) with 12 coin channels each. These blocks may be
programmed in a different way and thus can obtain different coin
combinations. This feature is particularly suitable for flexible switching
over from one currency to the other.
Due to the short switching-on time operation in a so-called wake-up
mode is possible. A sensor located in front of the coin slot switches
the coin validating system on. The feature is of great advantage for
devices that are operated with a battery or an accumulator.
The teach mode offers more flexibility to the operator when selecting
coins and token. Without any additional help only by using the teach
mode you can programme quickly coins or token on site.
Like all electronic coin validator systems from NRI the devices of the
series G-13.6000/G-13.7000 can be adjusted by means of a
programming station. For this you need an IBM compatible PC and
the adjustment programme KUNEMP. (For more information refer to
NRI.)
Before changing the device take care that the supply
voltage is switched off.
G-13.6 General information
