manualshive.com logo in svg

NRG Systems SymphoniePRO, User Manual

Looking for the comprehensive User Manual for NRG Systems SymphoniePRO? Look no further! Download the free manual on our website to unlock the full potential of this remarkable product. Explore its features, working principles, and get hands-on guidance for optimal usage. Enhance your SymphoniePRO experience today! Download at manualshive.com.

Share
Download
background image

 

 

 

 

 
 

SymphoniePRO User Manual 
Rev. 8 

[email protected] | Page 159 

11 January 2018 

Network Configuration 

Parameter 

iPackACCESS  

Computer 

Enable DHCP: 

No 

Yes 

Static IP Address 

192.168.3.100 

Assigned by DHCP 

Subnet Mask 

255.255.255.0 

Assigned by DHCP 

Gateway 

192.168.3.1 

Not used 

DNS1 

203.64.21.245 

Not used 

DNS2 

203.64.22.123 

Not used 

 

Networking Considerations 

 

Modbus default port is 502 but iPackACCESS can be configured to use any port number. 

 

iPackACCESS supports DHCP for automatic configuration of network address. 

 

If DHCP is disabled on either the iPackACCESS or the PC, you will need to manually edit the Static IP Address, 
Subnet Mask, and Gateway IP Address on that device.  Your IT administrator may be able to assist you with 
assigning the appropriate adderesses. 

 

As a security feature, the iPackACCESS can be configured to limit the allowed connections. 

 

iPackACCESS implements a standard 10baseT Ethernet interface that can auto-negotiate full or half duplex 
and adjust for crossover. 

 

iPackACCESS allows up to 4 simultaneous client connections. 

 

iPackACCESS allows configuration of SMTP port to accommodate different firewall settings. 

Connect to Network 

Connect and secure the cable assembly to the iPackACCESS’s Ethernet port, and connect the other end to your 
network or to a computer running the NRG Modbus Demo Client utility. 

Verifying Network Connection 

SymphoniePRO’s Connection Status screen [Home][2][2][2] provides Ethernet status, Network status, email 
status, and MetLink status. Use the right arrow to toggle between the different status screens.  

The Ethernet status screen will tell you if the iPack is connected via Ethernet, as well as the type of connection 
(Half Duplex or Full Duplex).  If no network connection is detected, the screen will display “No Link Detected”. 

The Network status screen shows the IP address assigned to the iPackACCESS (either through direct assignment 
or DHCP) and the DNS server being used. 

The Modbus status screen [Home][2][2][7] shows the Modbus server state and the number of clients 
connected. 

Summary of Contents for SymphoniePRO
























































































































































































































Reviews:

No comments

Related manuals for SymphoniePRO

Onset HOBO User Manual preview
HOBO
Brand: Onset Pages: 8
Gigahertz Solutions NFA 1000 Operating Manual preview
NFA 1000
Brand: Gigahertz Solutions Pages: 40
Data Harvest DS186 Manual preview
DS186
Brand: Data Harvest Pages: 19
FIEDLER H40 User Manual preview
H40
Brand: FIEDLER Pages: 44
M2MLogger LogPRO TOUCH User Manual preview
LogPRO TOUCH
Brand: M2MLogger Pages: 18
Quincy EQ LTE 2014900479 Technical Manual preview
EQ LTE 2014900479
Brand: Quincy Pages: 24
Ebro EBI 20 Series Manual preview
EBI 20 Series
Brand: Ebro Pages: 40
Fluke 2680A Service Manual preview
2680A
Brand: Fluke Pages: 254
Acumen DATABRIDGE SDR2-USB Configuration Manual preview
DATABRIDGE SDR2-USB
Brand: Acumen Pages: 41

Brands by name

Popular brands

Load more brands