NPort Networks N1-9802W, User Manual, Page: 206 / 296

206
Ports/QCL Status
Using QoS Control List Status to show QCE configured for
different users or software modules and whether or not there is a
conflict.
LOCATION
：
▼
Monitor
▼ Ports
￭
QCL Status
PARAMETERS
：
Items Description
Users Indicates the QCL user.
QCE# Indicates the index of QCE.
Frame
Type
Indicates the type of frame to look for incomming
frames. Possible frame types are
：
Any
：
The QCE will match all frame type.
Ethernet
：
Only Ethernet frames
(with Ether Type 0x600-0xFFFF) are allowed.
LLC
：
Only (LLC) frames are allowed.
SNAP
：
Only (SNAP) frames are allowed.
IPv4
：
The QCE will match only IPV4 frames.
IPv6
：
The QCE will match only IPV6 frames.
Port Indicates the list of ports configured with the
QCE.
Action Indicates the classification action taken on
ingress frame if parameters configured are
matched with the frame's content.
There are three action fields
：
Class, DPL and DSCP.
Class
：
Classified QoS class; if a frame matches
the QCE it will be put in the queue.
DPL
：
Drop Precedence Level; if a frame matches
the QCE then DP level will set to value
displayed under DPL column.
DSCP
：
If a frame matches the QCE then DSCP