- 26 -
DISASSEMBLY PROCEDURE
1. Place the hammer assembly w/
bracket (DR) on wood blocks
(t20). Make sure the hammer is
stable.
2. Remove the bracket bolts, nuts, and washers.
3. Lift the hammer (KK) from the
bracket (LL). Using a hoist, attach
a chain or strap (t27) to the
hammer and lift it out of the
bracket (LL).
4. Using a hammer (t29) and a
punch (ph13), remove the spring
pins (CT), washer (U), and slide
out the retaining pin (D) to remove
the tool (HH).