TEC-B-01 User Manual
____________________________________________________________________________________________________________________________
__________________________________________________________________________________
version 1.1
page 4
2. TEC-B-01
2.1. Components
The following items are shipped with the TEC-B-01 system:
TEC-B-01 amplifier
Headstage
Ground connector for headstage (2.6 mm)
Power cord
User manual
Optional accessories:
Electrode holder
Electrode holder adapter for mounting to a micromanipulator
Passive cell model
2.2. System
Description
The TEC-B-01 amplifier module is designed to be used together with a modified BA-1S, BA-01X or
BA-03X bridge amplifier. In two-electrode CC or VC mode the current is applied through the current
electrode connected to the TEC-B-01 and potential measurement is performed through the bridge
amplifier. The active connection of the two amplifiers is indicated by the DUAL LED. The bridge
amplifier has also an LED besides the display indicating two-electrode operation.
It is also possible to use the bridge amplifier as usual only with the electrode connected the BA-1S,
BA-01X or BA-03X. For operation of the bridge amplifier using only one electrode, the MODE OF
OPERATION switch of the TEC-B-01 has to be set into EXT or OFF position. In EXT position the
TEC-B-01 can be used as current pump, e.g. for iontophoresis.
2.3.
Description of the Front Panel
In the following description of the front panel elements each element has a number that is related to
that in Figure 1. The number is followed by the name (in uppercase letters) written on the front panel
and the type of the element (in lowercase letters). Then, a short description of the element is given.
