Foreword
-1-
Instruction Manual
DVD
– DivX Combo + Digital Terrestrial Receiver
Notice
1.Please pull out the plug from socket if not use the player for a long time .
2.Voltage range: AC 110V-240V . Confirm local electric wire netting voltages in this player's work voltage range .
3.Please confirm that all the connecting wires and power wires be connected correctly before switching on the power. And set
free volume of the connected AV player to minimum , regulate volume according to the need again after playing normally , so as
not to damage the AV player or loudspeaker.
4.Neither let this player close to high-power audio amplifier nor place them at the one tableboard , so as not to influence a normal
job of this player. 5.Keep ventilation and dry , keep away from heat resource , vibration , moisture and dust.
6.To avoid the electric shock or fire caused by the leaking liquid , do not put containers with liquid on this player, such as cup or
vase , etc .
7.When moved to warm place from relatively cold place , the laser head may dew and can't work normally . In case of this
situation , it will work in order in 1-2 hours after the power being switched on (no disc being inserted). 8.Clean the player with little
neutral detergent. Be sure not to use chemical such as alcohol, etc .
Characteristic
Compatible with DVD, MPEG 4, VCD, CD, MP3, CD-R discs, etc .
High definition progressive scanning , Y Pb Pr component output, SCART output
JPEG digital picture disc browse
Brand-new , computer operating interface
Built-in Dolby (AC-3) decoder, 5.1 channels output
Subtitle in 32 languages , dubbing in 8 languages / Multi-viewangle function Multi film plots
High picture quality / 4:3 or 16:9 aspect ratio
High quality digital audio coaxial output
OSD Multilanguage , dynamic screen saver
Computer memorized play , timed play , segment repeated play modes
Free conversion among PAL/NTSC/AUTO system / Multi-functional infrared remote control
New style switching power supply design
Accessories
Batteries Setting
Maintenance of CD
1 .Avoid being scratched and replaced into box after being used .
2.Wipe gently outwards from the center with soft clean cloth .
3.Do not use chemicals such as alcohol and detergent, etc .
4.Prevent from being heated and curled / No adhesive paper and letters on surface
Note:Access screen saver when in stopping or still picture for 3-4 mins;
Real DVD
– T 901H
Audio/video cables
Remote controller
1: Remove the cover
2: Put In 2 #7 batteries
3: Replace the cover
Cleaning No adhesive paper
Warnning:
Prevent from rain or moisture to avoid fire
or electric shock . Make commission repair
to qualified technicians since there are
dangerous high voltage fittings .
Note:
Laser beam irradiation may cause some
damage, please operate this player
properly according to the manual , and do
not open the cover to repair it so as not to
expose under the laser beam .
