background image

14 

5.0 Warranty Information 

 

5.1  One Year Limited Warranty 
All Noyes Fiber Systems' products are warranted against defective material and workmanship for a period of one year from 
the date of shipment to the original customer. Any product found to be defective within the warranty period would be 
repaired or replaced by Noyes Fiber Systems. In no case will Noyes Fiber Systems' liabilities exceed the original purchase 
price of the product.

 

 

5.2  Exclusions   
The warranty on your equipment shall not apply to defects resulting from the following: 
1.  Unauthorized repair or modification. 
2.  Misuse, negligence or accident. 

 

5.3  Warranty Registration 
A warranty registration card is included with the original shipment of equipment. Please take a few moments to fill out the 
card and mail or fax it to Noyes Fiber Systems to ensure proper initiation of your warranty term. 

 

5.4  Returning Equipment 
To return equipment, please contact Noyes Fiber Systems to obtain additional information and a Return Materials 
Authorization number (RMA#). To allow us to serve you more efficiently, please include a brief description describing the 
reason(s) for the return of the equipment.

 

 

 

 

 

NOYES FIBER SYSTEMS  

 

TEL:  800-321-5298 OR 603-528-7780 

 

 

 

16 EASTGATE PARK ROAD 

 

FAX: 603-528-2025      

   BELMONT, 

NH 

 

03220 

   

Summary of Contents for SMLP 5-5




















Reviews: