NVIP–
5
DN3600C
-
2P/F
-
User
’
s manual (short form) ver 1.0
All rights reserved © AAT Holding S.A.
16
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the
camera parameters or by using RJ45 network socket and PoE (802.3at/af) power
supply unit. If you
’
re using external power supply pleas connect wires according
to polarisation shown on picture:
Information:
Power supply adapter is not included. Please use power adapter with parameters
specified in user
’
s manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate
surge protectors is advised. Any damages resulting from surges are not eligible for service
repairs.
5.2. Camera control
-
RS
-
485
By using the RS485 interface can control an external camera PTZ domes. For this purpose, use the
RS
-
485 port on the rear of the camera. Camera got default settings for protocol (Pelco
-
P, 4800).
5.3. Connecting alarm inputs/outputs.
Alarm input
•
Alarm input connection
ELECTRIC CONNECTORS AND ACCESORIES
IP Camera
Switch/sensor
IP
Camera
PTZ
Device
RS
-
485
+
-
+
-
+
-
DC 12V
AV 24V
Alarm
input (+)
Alarm IN
Alarm
input (
-
)
Alarm GND
