NOVUS AUTOMATION.
1/3
NP600
RELATIVE PRESSURE TRANSMITTER – INSTRUCTIONS MANUAL – V1.0x D
PRESENTATION
The
NP600
relative pressure transmitter series are robust and
reliable equipment suitable for general industrial applications. Its
great advantage is the possibility of a fast and easy configuration of
the operating range. With the aid of a software, the user has access
to the most important information of the transmitter and can set the
most appropriate configuration for the process.
The
NP600
model has a ceramic sensor with high mechanical
stability.
PRECAUTION
Before operating the transmitter, carefully read its specifications and
operating instructions. In case of damage caused by incorrect
operation or inappropriate usage, and its consequences, the
guarantee becomes ineffective and null.
A specialized professional shall perform the installation.
A specific electrical power supply network should be provided for
instruments use only.
UNPACKING
After unpacking the product, besides the transmitter it must be
available:
•
A quick guide to installation and operation.
•
A sealed electrical connector.
•
A screw to adjust the transmitter and the connector.
IDENTIFICATION
An identification label is attached to the equipment housing. On this
label, you can found detailed information about the transmitter.
Fig. 1
shows the identification label with their respective information.
Fig. 1
– Transmitter identification
SPECIFICATIONS
Maximum Range (Max. Range):
0-2 / 0-5 / 0-10 / 0-20 / 0-50 / 0-100 Bar (*)
Rangeability
:
3:1
Measurement Accuracy:
≤ 50 bar ...................................................... < ±0.5 % Max. Range
100 bar ....................................................... < ±1.0 % Max. Range
Including linearity, hysteresis and repeatability, 25 °C
Thermal Maximum Deviation
:
< ±0.06 % Max. Range / °C
Overpressure Range
:
Twice the value specified for the Maximum Measurement Range
Output Signal (Output)
:
Electric currente, 4-20 mA, 2 wires.
Power Supply (Power)
:
11 to 33 Vdc
Electrical Connection
:
Connector for Type A valves (DIN EN 175301-803), IP65.
Conductor 1.5 mm² (max.) and cables between 6 and 8 mm in
diameter.
Operating temperature
:
-20 to 70 °C
Dinamic Response
:
< 30 ms
Process Conection (Thread)
:
¼ NPT, ½ NPT, ½ BSP, G ¼ (*)
Materials
:
Metal housing of the transmitter ...................................... Stainless 316
Sensor (NP600) .................................................. Ceramic (Al
2
O
3
96 %)
Wetted parts (NP600) ............................ Sensor Ceramic (Al
2
O
3
96 %)
.................................................................................. Sealing ring, FKM
................................................... Metal connection, stainless steel 316
Compatibility
: Any gas or liquid compatible with the constituent
materials of the wetted parts.
(*)Information available on the product identification label.