NHDR-3104AHD-II, NHDR-3108AHD-II, NHDR-3116AHD-II
User's manual (short) ver. 1.0
All rights reserved © AAT Holding S.A.
13
2.3. Connecting power adapter.
Connect provided DC 12V adapter in the rear power port of the DVR like depicted below.
To start the unit turn on the power switch on back panel. Initialization lasts for approximately 60
seconds. During this time executing any device functions and pressing any buttons is prohibited. To
shut down the device use the menu.
CAUTION:
Make connection when the power is not applied.
Do not place the power cord under the carpet or rug. The power cord is usually earth-grounded.
However, even if it's not earth-grounded, never modify it on your own for earth-grounding.
Make sure that power adapter is placed near of DVR and secured from accidental disconnection.
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
STARTING THE DEVICE
12V DC ADAPTER
POWER SWITCH
