Operation Manual
Hardness Tester NOVOTEST T-UD3
Page. 35
Figure 2.43 - Archive
Use keys <
> and <
> to navigate.
After selecting the required saved measurement, the user can not only see it, but also print: turn on
the printer and press <
>.
To delete a record from the archive, select it with the navigation keys and press <
>, after
that the confirmation message <DELETE?> is displayed on the display, press key <
> to delete
or <
>, to cancel.
2.3.10 Memory card
When the menu item <MEMORY CARD> is selected, the device goes to the memory menu
(Figure 2.44).
Figure 2.44 - Section <MEMORY CARD>
−
Creating backup copies of calibrations.
After the probe calibrating, it is recommended user to create a backup calibration (usually the
manufacturer calibrates 1-2 scales to check the probe). This is done in order to be able to restore
the proper calibration after incorrect settings in the future.
After initial saving of the calibrations, user can always transfer the settings to the probe. This
function is needed to restore proper calibration in case of incorrect probe settings.
−
Memory card cleaning.
Deleting of saved records in the archive and backup copies of the calibrations: after cleaning the
SD card, the archive will be empty and the backup copies of the calibrations will be saved.
At the bottom of the screen of this menu the memory status indicator is displayed.