Novidan NoviOne RIC, User Manual

Page: 15 / 28

The cable is installed by holding it by the plastic connector end and pushing it into the
hearing aid socket until it is fully seated in the orientation shown below. Double check that
the cable is fullery inserted into the hearing aid socket.
Replacing an Eartip/dome
An eartip/dome may be removed to be replaced or to change sizes. To remove the eartip/
dome, hold the cable in one hand and pinch the end or side of the eartip/dome with the
other hand. Pull the eartip/dome straight out from the barb. See page 7 for more informa-
tion about eartips/domes.
A new eartip/dome is installed by holding onto the end of the eartip/dome and pushing the
eartip/dome over the barb of the speaker. Ensure the eartip/dome is
completely seated
over the barb.
To remove
To install
15