Novexx ALX 924, User Manual

Page: 52 / 91

User Manual
ALX 92x
09/2016 | 01 52 Startup and Operation
Connecting sensors
 Before switching on the machine, check to ensure all required sensors are securely connected.
Minimum required sensors
Product sensor
• Assembly location: assembly line
• Connection: Sub-D connector at AI or USI (both optional boards)
Optional additional sensors
Sensors for OD
1
detection:
• Assembly location: assembly line
• Connection: Sub-D connector at AI or USI (both optional boards)
The sensor cables must be produced and connected by an authorised specialist who is
aware of the risks involved.
More extensive information about suitable sensor types, pin assignment, etc. may be found
in the Assembly/Service manual.
WARNING!
This unit operates at mains voltage! Contacting electrically live components can cause lethal
electrical shocks and burns.
 The machine must only be connected with other machines if they meet the requirements of a
SELV circuit (Safety Extra-Low Voltage circuit) in accordance with EN 60950.
1) OD = Outer Diameter (of the material roll)