User Manual
XLP 604
Related reference
on page 61
Removing the used up ribbon
Before you begin
• Machine ist stopped ( “Home” screen).
• The warning notes about inserting ribbon have been read and understood (see
on page 63)
About this task
If a ribbon roll is used up, the used ribbon is all wound up on the rewinding mandrel and has to be re-
moved from there. The ribbon end is signaled by the appropriate status message or warning on the
operation panel of the machine. If a signal beacon is connected, the lamps light up.
Procedure
1.
Open the front hood (A, figure below).
2.
Open the pressure lever on the print head (B, figure above).
Edition 2 - 12/2021
66
Operation
Inserting and removing ribbon
