User Manual
XLP 604
► Press the
key to confirm and to trigger the restart.
BASIC SETTINGS
Basic settings with the setup wizard
The setup wizard controls the automatic retrieval of basic settings in the parameter menu that are
essential for the operation of the printer.
After the first starting-up of the printer, the display shows the query „Run Setup Wizard?“.
After selecting "Yes", the parameters for the most important basic settings are queried in several
groups. The relevant parameters are automatically called up for this purpose. After the basic settings,
e.g. for the language or the printer interface, the network and dispense settings are optionally queried
(yes/no query in each case).
Which parameters are called also depends on the selection in the preceding parameter. The last step
is to display a summary of the settings made (fig. below), which must be confirmed by pressing a key.
Fig. 37: Summary of the settings done by the wizard (Example, merged by image processing, in fact it must be scrolled to see
all lines).
Execute settings
:
► Press the
key.
A restart takes place and the settings are made.
Discard settings
:
► Press the
key.
Edition 2 - 12/2021
59
Before Operation
Basic Settings
