User Manual
XLP 514/516
•
Full size
: w/o function
•
Reflex (upper)
: w/o function
Ribbon length
Setting range
Default setting
Step width
Easy Plug
[300.0...500.0] m
450.0 m
0.1 m
#PC1038
Ribbon length of the applied ribbon roll. The ribbon length is marked on the packaging of the new rib-
bon roll. This setting is important for proper functioning of the ribbon-end warning.
Outer ribbon Ø
(Outer ribbon roll diameter)
Setting range
Default setting
Step width
Easy Plug
[50.0...100.0] mm
80.0 mm
0.1 mm
#PC1039
Outer Ø of the applied ribbon roll. This setting is important for proper functioning of the ribbon-end
warning.
Inner ribbon Ø
(Inner ribbon roll diameter)
Setting range
Default setting
Step width
Easy Plug
[28.0...40.0] mm
33.0 mm
0.1 mm
#PC1040
Inner Ø of the applied ribbon roll. This setting is important for proper functioning of the ribbon-end
warning.
Inner Ø of the ribbon roll = Outer Ø of the ribbon core!
Thin line emphas
(Thin line emphasis)
Settings
Default setting
Step width
Easy Plug
On, Off
On
--
#PC2066
Print emphasis for thin lines in order to get a better print result.
•
On
: Print emphasis for thin lines is switched on.
Thin lines in the printout, which run crossways to the printing direction, are printed approx. 1.5 times
wider. This may have the effect, that small white patches are closed with color (e.g. in the „e“ with
very small fonts)
•
Off
: Print emphasis for thin lines is switched off
Edition 1 - 8/2021
50
Product Description
Parameter menu
