User Manual
XLP 514/516
3.
Remove the guide disc (picture above, C) of the material unwinder.
4.
(Optional) If the inner diameter of the material roll is larger than the diameter of the unwinder man-
drel: Attach
adapter rings
(picture). To do this, press the adapter rings together at the grip sur-
faces, push them to the desired position and release the grips again.
The adapter rings must fit into the core of the material roll with as little play as possible (A).
Push the inner adapter ring onto the dispenser as far as it will go. Adjust the outer adapter ring
to the width (X) of the material roll.
5.
Push the label roll onto the unwinder as far as it will go (picture left). Lay the material web around
the strain relief (A).
6.
Push the guide disc against the material roll as far as it will go (picture top right).
Edition 1 - 8/2021
66
Operation
Inserting and removing label material