Novexx Solutions XLP 504, Service Manual, Page: 143 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 143 Parameter Menu
• Compact left : Setting for 50 mm material width. The parameter values are printed on the left
side of the parameter names:
Value: Parameter name
Print Interpret.
• Easyplug : Printjobs written in the Easy Plug command language can be interpreted.
• Lineprinter : Lineprinter (or similar to Lineprinter), print-out of the print command
• Hexdump : Print-out in hexadecimal format.
In Lineprinter and Hex Dump, commands are printed out in the form of a list with the character
set 12.

When setting Lineprinter or Hex Dump, Easy Plug commands which have not yet been
processed are deleted!
• ZPL Emulation : Printjobs written in the ZPL II®
1
command language („ZPL“) can be interpreted

Firmware loading requires changing into EasyPlug first.
Print interface
This parameter sets the interface, by which the printer will receive data.
• Serial Com1 : Serial interface Com1.
• TCP/IP SOCKET : Print data can be sent to the printer via a TCP/IP socket.
• LPD server : Print data can be sent to the printer via the LPR/LPD-protocol
• USB : USB interface
• Serial Com3 : Serial interface Com3.

Only with optional I/O board mounted

election of the type of serial interface is done with parameter
Print interface > Serial Port 3 > Serial
port mode
.
• Auto negotiation : All interfaces are enabled to receive data, but not simultaneously .

Don´t send data to more than one interface at a time.

Except are interfaces, which are being used by an option (e.g. OLV)
Settings Default setting Step width Easy Plug
Easyplug, Lineprinter, Hexdump,
ZPL Emulation
Easyplug -- #PC2012
1) ZPL II is a registered trademark of ZIH Corp.
Settings Default setting Step width Easy Plug
Serial Com1, TCP/IP SOCKET,
LPD server, USB, Serial Com3,
Auto negotiation
Auto negotiation -- #PC1101