Operating manual
LTSA LTMA
CLEANING
Safety
WARNING!
Shearing movement between applicator and dispensing edge!
Risk of crushing of the fingers between applicator and dispensing edge and between
the moving parts of the applicator!
► Before cleaning the applicator, switch off the printer and remove the mains plug
Cleaning interval
► Clean the machine regularly.
The frequency depends on the following factors:
• Operating conditions
• Daily operating duration
Cleaning
CAUTION!
Using sharp cleaning materials may cause damage.
► Do not use any cleaning agents or materials that could damage or destroy
the paint finish, labelling, type plates, electrical component, etc.
► Do not use any scouring cleaning agents or any cleaning agents that could
dissolve plastic.
► Do not use acid or alkaline solutions.
Cleaning agent:
• Compressed air, vacuum cleaner (if available)
• Methylated spirits (ethanol) or isopropyl alcohol
To perform:
► Blow off dust and abrasion with compressed air or remove using a vacuum cleaner (if compressed
air or vacuum cleaner is available)
► Dampen a cloth with methylated spirits or isopropyl alcohol and wipe down the machine.
Edition 02 - 7/2021
30
Operation / Malfunctions / Cleaning
Cleaning
