Novexx Solutions ALX 92x, Service Manual

Page: 96 / 824

04/16 Rev. 06 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
21
Access via Web/FTP server
Web server
Applications
The web server makes it possible
• to set or read the values of parameters from the parameter menu via a web
browser
• to control the operator panel of the labeller resp. the printer via a web browser.

The web server is not multi-session compatible, i.e. only one user can be logged
in at any time.

The web server is a setup utility, not an operational one. The web server should
not be heavily used during a high performance application of the dispenser, otherwise
this could result in losses in machine performance.
Prerequisites
• Suitable printers: All printers listed in the headline, apart from the AP 4.4
• Required firmware:
• The printer is connected to a network
• A valid IP address is assigned to the printer (by the network administrator or by a
DHCP server)
•
INTERFACE PARA >NETWORK PARAM. > WEB server
must be set to “On”.
Starting the web server
1. Note down the IP address of the printer.

This is shown under
INTERFACE PARA >NETWORK PARAM. > IP address
2. Start the internet browser.
3. Enter the following in the address bar:
http://[IP address without initial zeroes]
Example: IP address = 144.093.029.031
Enter: http://144.93.29.31
Printer Feature Min. firmware vers.
64-xx, DPM, PEM, ALX 92x Gen. 2 3.40
64-xx, DPM, PEM, ALX 92x Gen. 3 5.02
AP 5.4, AP 7.t -- 3.0
AP 5.4 Gen II, AP 5.6 MLK 3.34