Novexx Solutions ALX 92x, Service Manual, Page: 768 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
79
9116 Ser. Disp. Missing
Status Occurs during a firmware update of a serial operation panel, if no such
device was found.
Measure

Check the configuration.
The status message is cancelled automatically. The download continues.
9117 Device Unknown
Status Occurs during a firmware update, if the device information in the header is
missing.
Measure

Switch printer off and on again. Check the configuration.
9118 H8 Update Fail.
Status The update of a H8 device failed.
Measure  Switch printer off and on again.
9119 H8 missing
Status Occurs during a firmware update of a H8 device, if no such device was
found.
Measure

Check the configuration.
The status message is cancelled automatically. The download continues.
9122 Checksum error
Status Checksum error while loading a firmware file. The checksum of the loaded
data doesn´t match the calculated checksum.
Measure

Repeat the download.

If the error continues to occur, the file is probably damaged or corrupted.
Check/ exchange the firmware file.
9123 Memory unavailable
Status Error while loading a firmware file. There is not enough free memory
available.
Measure

Restart machine and repeat the download.
 If the error continues to occur: Reduce the memory which is assigned by
the following parameters:
-
SYSTEM PARAMETERS > Ram disc size
- SYSTEM PARAMETERS > Font downl. area
- SYSTEM PARAMETERS > Free store size