Novexx Solutions ALX 92x, Service Manual

Page: 704 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
15
1089 Seek Fkt. Error
Status General software error. An error occured while processing the function
„seek“ in the internal file system of the printer.
Measure

Confirm by pressing the Online button.

Please read the notes in section General software errors  .
1090 Incomplete Job
Status The actual print job was not terminated by the #Q command. In other
words, after a start command #ER for a label format follows another #ER
command without the first format being terminated by #Q.
Measure

Confirm by pressing the Online button.
 Terminate the print job with a #Q command.
1091 Wrong var field
Status An error occured while interpreting the text string of a variable data field.
The error could e.g. be caused by a #YT or a #YB command (Easy Plug).
Self-acknowledging error.
Measure

Check the text strings of variable data fields.
1092 Rename file
Status General software error
Measure  Please read the notes in section General software errors

.
1093 Delete file
Status File cannot be deleted.
Measure

Check whether the file name is written correctly; check whether the file is
write-protected.
1094 More than 3 figs
Status General software error
Measure

Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
1097 Out of memory
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
1099 File end
Status General software error
Measure  Please read the notes in section General software errors  .